Skip to content

DIY Car Makeovers: How to Apply Raail AirWrap Spray-On Removable Coatings at Home

Transforming the look of your car can be an exhilarating experience, especially when you take the DIY route. Raail AirWrap offers car enthusiasts an accessible way to achieve a professional-looking finish without the professional price tag. This guide will walk you through the process of applying Raail AirWrap spray-on removable coatings at home, ensuring that you end up with a result that not only looks great but lasts.

Preparing Your Workspace

Set the Stage: The first step in any successful DIY project is preparation. Choose a well-ventilated area, like a garage with doors and windows open, or an outdoor space sheltered from wind and debris. Ensure the area is clean and dust-free to avoid any particles sticking to the wet coating.

Gathering the Right Tools

Equip Yourself: You’ll need a few key tools to apply Raail AirWrap effectively:

  • A high-volume, low-pressure (HVLP) spray gun
  • Masking tape and paper for covering areas not being painted
  • A clean cloth and a pre-paint cleaner to remove any oils or residues
  • Protective gear, including gloves and a mask

Prepping Your Car

Clean Slate: The secret to a flawless finish is in the prep work. Wash your car thoroughly to remove all dirt and grime. Once dry, use a clay bar to eliminate any contaminants from the paint surface. Tape off the areas you don’t want to coat, such as windows and lights.

Mixing the Product

Perfect Blend: Raail AirWrap comes ready to spray, but you’ll want to ensure it’s well mixed. Stir the coating thoroughly before pouring it into the spray gun. If required, you can thin the product according to the instructions to achieve the optimal consistency.

Applying the Coating

Layer It On: Start spraying with a steady hand, keeping the gun parallel to the car’s surface. Apply the AirWrap in thin, even layers, building up the coating with multiple passes. Allow each layer to dry as per the recommended time before applying the next. Typically, several layers will be necessary to achieve full coverage.

Drying and Curing

Patience Pays Off: After the final coat, give your car ample time to dry. Rushing this process can result in a finish that’s not durable or even. Raail AirWrap dries to the touch in a few hours but will need longer to cure fully. Check the product instructions for specific drying times.

Peeling and Maintenance

Care and Repair: Once dry, carefully remove any masking tape and paper. If overspray occurs, it can usually be peeled off cleanly. Maintain your new finish with gentle washing using pH-neutral cleaners. Avoid abrasive materials that can scratch or peel the coating.

Enjoying the Results

Show it Off: After all your hard work, it’s time to enjoy the fruits of your labor. Raail AirWrap provides a fresh, durable finish that can last several years with proper care. The best part? If you decide to change the color or go back to the original paint, the coating can be peeled off without damaging the underlying surface.


DIY car makeovers can be a rewarding way to personalize your vehicle. Raail AirWrap offers a straightforward solution for those looking to change their car’s appearance with their own hands. By following these steps and applying some elbow grease, you’ll become your own car customization specialist in no time.


IT Support by SADOSSecure, Fast Hosting for WordPress